0View Cart

Screw Pin Anchor Shackles G-210

No.: G210

DESCRIPTION

786

TABLE PARAMETER

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D
Type IVB,Grade A,Class 2,except for those provisions required of the contractor.


Nominal Size(in.)Working Load Limit(t)PART NUMBERWeight Each(lbs)DimensionsTolerance‘+/-
(in.)
G-210ABCDEFGKLMGA
1/41/2RSCS01040.110.470.310.250.250.970.620.971.590.191.430.060.06
5/163/4RSCS05160.170.530.380.310.311.150.751.071.910.221.710.060.06
3/81RSCS03080.280.660.440.380.381.420.921.282.310.252.020.130.06
7/161-1/2RSCS07160.430.750.50.440.441.631.061.482.670.312.370.130.06
1/22RSCS01020.590.810.630.50.51.811.181.663.030.382.690.130.06
5/83-1/4RSCS05081.251.060.750.630.632.321.52.043.760.443.340.130.06
3/44-3/4RSCS03042.631.250.880.810.752.751.812.44.530.53.970.250.06
7/86-1/2RSCS07083.161.4410.970.883.22.12.865.330.54.50.250.06
18-1/2RSCS10004.751.691.13113.692.383.245.940.565.130.250.06
1-1/89-1/2RSCS11086.751.811.251.251.134.072.693.616.780.635.710.250.06
1/1/412RSCS11049.062.031.381.381.254.5333.977.50.696.250.250.13
1-3/813-1/2RSCS130811.632.251.51.51.385.013.314.438.280.756.830.250.13
1-1/217RSCS110215.952.381.631.621.55.383.624.849.050.817.330.250.13
1-3/425RSCS130426.752.8822.121.756.384.195.7810.9719.060.250.13
235RSCS200042.313.252.252.362.17.2556.7712.741.1310.350.250.13
2-1/255RSCS210271.754.122.752.632.639.385.688.0714.851.38130.250.25

 

NOTE:Maximum Proof load is 2.0 times the Working Load Limit.Minimum Ultimate Strength is 6 times the
Working Load Limit.For Working Load Limit reduction due to side loading applications,see page 74.

﹒Capacities 1/3 thru 55 metric tons.
﹒Forged-Quenched and Tempered ,with alloy pins.
﹒Working Load Limit permanently shown on every shackle.
﹒Hot Dip galvanized or Self Colored.
﹒Fatigue rated.
﹒Shackles 25t and larger are RFID EQUIPPED.
﹒Shackles can be furnished proof tested with certificates to designated standards,such as ABS,DNV,Lloyds,or other certification.Charges for proof testing and certification available when requested at the time of order.
﹒Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 degree C.


INQUIRE NOW:

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Click Refresh