PT
Round Pin Chain Shackles G-215
No.: G215DESCRIPTION
108
TABLE PARAMETER
Round pin chain shackles meet the performance requirements of Federal Specification RR-C-271D
Type IVB,Grade A,Class 1,except for those provisions required of the contractor.
| Nominal Size | Working Load Limit (t) | PART NUMBER | Weight Each | Dimensions (in.) | Tolerance +/- | |||||||||
| (lbs) | A | B | C | D | E | F | G | K | N | G | A | |||
| 1/4 | 1/2 | RRCS0104 | 0.1 | 0.47 | 0.31 | 0.25 | 0.25 | 0.97 | 0.62 | 0.91 | 1.59 | 1.34 | 0.06 | 0.06 |
| 5/16 | 3/4 | RRCS0516 | 0.18 | 0.53 | 0.38 | 0.31 | 0.31 | 1.15 | 0.75 | 1.07 | 1.91 | 1.63 | 0.06 | 0.06 |
| 3/8 | 1 | RRCS0308 | 0.25 | 0.66 | 0.44 | 0.38 | 0.38 | 1.42 | 0.92 | 1.28 | 2.31 | 1.86 | 0.13 | 0.06 |
| 7/16 | 1-1/2 | RRCS0716 | 0.4 | 0.75 | 0.5 | 0.44 | 0.44 | 1.63 | 1.06 | 1.48 | 2.67 | 2.13 | 0.13 | 0.06 |
| 1/2 | 2 | RRCS0102 | 0.5 | 0.81 | 0.63 | 0.5 | 0.5 | 1.81 | 1.18 | 1.66 | 3.03 | 2.38 | 0.13 | 0.06 |
| 5/8 | 3-1/4 | RRCS0508 | 1.21 | 1.06 | 0.75 | 0.63 | 0.63 | 2.32 | 1.5 | 2.04 | 3.76 | 2.91 | 0.13 | 0.06 |
| 3/4 | 4-3/4 | RRCS0304 | 2 | 1.25 | 0.88 | 0.81 | 0.75 | 2.75 | 1.81 | 2.4 | 4.53 | 3.44 | 0.25 | 0.06 |
| 7/8 | 6-1/2 | RRCS0708 | 3.28 | 1.44 | 1 | 0.97 | 0.88 | 3.2 | 2.1 | 2.86 | 5.33 | 3.81 | 0.25 | 0.06 |
| 1 | 8-1/2 | RRCS1000 | 4.75 | 1.69 | 1.13 | 1 | 1 | 3.69 | 2.38 | 3.24 | 5.94 | 4.53 | 0.25 | 0.06 |
| 1-1/8 | 9-1/2 | RRCS1108 | 6.3 | 1.81 | 1.25 | 1.25 | 1.13 | 4.07 | 2.68 | 3.61 | 6.78 | 5.13 | 0.25 | 0.06 |
| 1-1/4 | 12 | RRCS1104 | 9 | 2.03 | 1.38 | 1.38 | 1.25 | 4.53 | 3 | 3.97 | 7.5 | 5.5 | 0.25 | 0.13 |
| 1-3/8 | 13-1/2 | RRCS1308 | 12 | 2.25 | 1.5 | 1.5 | 1.38 | 5.01 | 3.31 | 4.43 | 8.28 | 6.13 | 0.25 | 0.13 |
| 1-1/2 | 17 | RRCS1102 | 16.15 | 2.38 | 1.63 | 1.62 | 1.5 | 5.38 | 3.62 | 4.87 | 9.05 | 6.5 | 0.25 | 0.13 |
| 1-3/4 | 25 | RRCS1304 | 29.96 | 2.88 | 2 | 2.12 | 1.75 | 6.38 | 4.19 | 5.82 | 10.97 | 7.75 | 0.25 | 0.13 |
| 2 | 35 | RRCS2000 | 43.25 | 3.25 | 2.25 | 2.36 | 2.1 | 7.25 | 5 | 6.82 | 12.74 | 8.75 | 0.25 | 0.13 |
NOTE:Maximum Proof load is 2.0 times the Working Load Limit.Minimum Ultimate Strength is 6 times the
Working Load Limit.For Working Load Limit reduction due to side loading applications,see page 74.
﹒Capacities 1/2 thru 35 metric tons.
﹒Forged-quenched and tempered ,with alloy pins.
﹒Working Load Limit permanently shown on every shackle.
﹒Hot Dip galvanized or Self Colored.
﹒Fatigue rated.
﹒Shackles 25t and larger are RFID EQUIPPED.
INQUIRE NOW：
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
